,
  1. Home
  2. Industrial Ethernet Switches
  3. IGS-20040MT

IGS-20040MT

Previous Product | Next Product
Product Description
IGS-20040MT L2+ Industrial 16-Port 10/100/1000T + 4 100/1000X SFP Managed Switch (-40~75 degrees C)

Physical Port
  • 16-Port 10/100/1000Base-T RJ45 copper
  • 4 100/1000Base-X mini-GBIC/SFP slots, SFP type auto detection
  • One RJ45 console interface for basic management and setup
  • Industrial Case / Installation
  • IP30 aluminum case protection
  • DIN-rail and wall-mount design
  • Redundant Power Design
  • - 12 to 48V DC, redundant power with polarity reverse protect function
  • - AC 24V power adapter acceptable
  • Supports EFT protection for 6000V DC power and 6000V DC Ethernet ESD protection
  • -40 to 75 degrees C operating temperature
  • Digital Input / Digital Output
  • 2 Digital Input (DI)
  • 2 Digital Output (DO)
  • Integrates sensors into auto alarm system
  • Transfers alarm to IP network via email and SNMP trap
Layer 2 Features
  • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm Control support
  • - Broadcast / Multicast / Unknown Unicast
  • Supports VLAN
  • - IEEE 802.1Q tagged VLAN
  • - Up to 255 VLANs groups, out of 4095 VLAN IDs
  • - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
  • - Private VLAN Edge (PVE)
  • - Protocol-based VLAN
  • - MAC-based VLAN
  • - Voice VLAN
  • Supports Spanning Tree Protocol
  • - STP, IEEE 802.1D Spanning Tree Protocol
  • - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • - MSTP, IEEE 802.1s Multiple Spanning Tree Protocol by VLAN
  • - BPDU Guard
  • Supports Link Aggregation
  • - 802.3ad Link Aggregation Control Protocol (LACP)
  • - Cisco ether-channel (Static Trunk)
  • - Maximum 10 trunk groups, up to 8 ports per trunk group
  • - Up to 16Gbps bandwidth(duplex mode)
  • Provides port mirror (many-to-1)
  • Port Mirroring of the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Supports E.R.P.S. (Ethernet Ring Protection Switching)
  • IEEE 1588 and Synchronous Ethernet network timing
Quality of Service
  • Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
  • - IEEE 802.1p CoS
  • - IP TOS / DSCP / IP Precedence
  • - IP TCP/UDP port number
  • - Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Supports QoS and In/Out bandwidth control on each port
  • Traffic-policing policies on the switch port
  • DSCP remarking
Multicast
  • Supports IPv4 IGMP Snooping v1, v2 and v3
  • Supports IPv6 MLD Snooping v1 and v2
  • Querier mode support
  • IGMP Snooping port filtering
  • MLD Snooping port filtering
  • MVR (Multicast VLAN Registration)
Security
  • Authentication
  • - IEEE 802.1x Port-based / MAC-based network access authentication
  • - Built-in RADIUS client to cooperate with the RADIUS servers
  • - TACACS+ login users access authentication
  • - RADIUS / TACACS+ users access authentication
  • Access Control List
  • - IP-based Access Control List (ACL)
  • - MAC-based Access Control List
  • Source MAC / IP address binding
  • DHCP Snooping to filter un-trusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • Auto DoS rule to defend DoS attack
  • IP address access management to prevent unauthorized intruder
  • Layer 3 IP Routing Features
  • Supports maximum 32 static routes and route summarization

Specification