,
  1. Home
  2. Industrial POE switches
  3. ISW-504PT

ISW-504PT

Previous Product | Next Product
Product Description
5-Port 10/100Mbps with 4-Port PoE Industrial Ethernet Switch - Wide Temperature

Interface

• 4 10/100BASE-TX Fast Ethernet IEEE 802.3at PoE+ RJ45 
copper ports (Port-1 to Port-4) 
• 1 10/100BASE-TX Fast Ethernet non-PoE RJ45 copper port 
• One terminal block for master and slave power input (Power 
Range: 12 ~ 48V DC redundant power) 
• Hardware DIP switch for Standard, VLAN and Extend mode 
selection; the Extend mode features 25-watt PoE transmission 
distance of 250m at speed of 10Mbps (Only for Port-1 to Port-4)

Power over Ethernet

• Complies with IEEE 802.3at Power over Ethernet Plus, end- 
span PSE 
• Backward compatible with IEEE 802.3af Power over Ethernet 
• Up to 4 ports of IEEE 802.3af/at devices powered 
• Up to 120-watt PoE budget 
• Supports PoE power up to 36 watts for each PoE port 
• Each port supports 54V DC power to PoE powered device 
• Auto detects powered device (PD) 
• Circuit protection prevents power interference between ports 
• Remote power feeding up to 100m in standard mode with 250m 
in extend mode

Switching

• Hardware-based 10/100Mbps (half/full duplex), auto-negotiation 
and auto MDI/MDI-X 
• Features Store-and-Forward mode with wire-speed filtering and 
forwarding rates 
• IEEE 802.3x flow control for full duplex operation and back 
pressure for half duplex operation 
• 1K MAC address table size 
• 1536 Bytes jumbo frame 
• IEEE 802.1Q VLAN transparency 
• Automatic address learning and address aging 
• Supports CSMA/CD protocol

Industrial Case and Installation

• IP40 metal case 
• DIN-rail, wall-mount design or side wall-mount design 
• 12~48V DC redundant power with polarity reverse protect 
function 
• Fault alarm for power input failed 
• Supports 5KV DC Ethernet ESD protection 
• -40 to 75 degrees C operating temperature 
Data Sheet 
• 4 real-time PoE power usage indicators 
ISW-504PT/ISW-514PTF

Specification