,
  1. Home
  2. GS-4210-24P2S

GS-4210-24P2S

Product Description
24-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch

Description

Physical Port
  • 24-port 10/100/1000Base-T Gigabit RJ-45 copper
  • 2 100/1000Base-X mini-GBIC/SFP slots
  • RJ-45 console interface for switch basic management and setup
  • Reset button for system factory default and reboot

Power over Ethernet

  • Complies with IEEE 802.3at High Power over Ethernet
  • Complies with IEEE 802.3af Power over Ethernet
  • Up to 24 ports of IEEE 802.3af / 802.3at devices powered
  • Supports PoE Power up to 30.8 watts for each PoE port
  • 300-watt PoE budget
  • Auto detects powered device (PD)
  • Circuit protection prevents power interference between ports
  • Remote power feeding up to 100m
  • PoE Management
  • - Total PoE power budget control
  • - Per port PoE function enable/disable
  • - PoE Port Power feeding priority
  • - Per PoE port power limitation
  • - PoE delay
  • - PD classification detection

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Supports VLAN
  • - IEEE 802.1Q tagged VLAN, up to 256 VLAN groups, out of 4094 VLAN IDs
  • - Protocol VLAN
  • Supports Spanning Tree Protocol
  • - STP (Spanning Tree Protocol)
  • - RSTP (Rapid Spanning Tree Protocol)
  • - MSTP (Multiple Spanning Tree Protocol)
  • - STP BPDU Guard, BPDU Filtering and BPDU Forwarding
  • Supports Link Aggregation
  • - IEEE 802.3ad Link Aggregation Control Protocol (LACP)
  • - Maximum 8 LACP groups, up to 16 ports per LACP group
  • - Cisco ether-channel (Static Trunk)
  • - Maximum 8 trunk groups, up to 8 ports per trunk group
  • Provides port mirror (many-to-1)

Quality of Service

  • Ingress / Egress Rate Limit per port bandwidth control
  • Storm Control support
  • - Broadcast / Unknown-Unicast / Unknown-Multicast
  • Traffic classification
  • - IEEE 802.1p CoS
  • - DSCP / IP Precedence of IPv4 / IPv6 packets
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Multicast
  • Supports IGMP Snooping v2 and v3
  • IGMP Querier mode support
  • IGMP Snooping port filtering
  • Up to 256 multicast groups

Security

  • Authentication
  • - IEEE 802.1X port-based network access authentication
  • - Built-in RADIUS client to co-operate with the RADIUS servers
  • - DHCP Option 82
  • - RADIUS / TACACS+ login user access authentication
  • Access Control List
  • - IPv4 IP-based ACL
  • - IPv4 IP-based ACE
  • - MAC-based ACL
  • - MAC-based ACE
  • MAC Security
  • - Static MAC
  • - MAC Filtering
  • Port Security for Source MAC address entries filtering
  • DHCP Snooping to filter distrusted DHCP messages

Management

  • Switch Management Interface
  • - Local Command Line Interface
  • - Web switch management
  • - Telnet Command Line Interface
  • - SNMP v1, v2c and v3
  • - HTTPs secure access
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • Static and DHCP for IP address assignment
  • System Maintenance
  • - Firmware upload / download via HTTP / TFTP
  • - Configuration upload / download through HTTP / TFTP
  • - Dual Images
  • - Hardware reset button for system reboot or reset to factory default
  • SNTP Network Time Protocol
  • Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
  • SNMP trap for interface Link Up and Link Down notification
  • Event message logging to remote Syslog server
  • Four RMON groups (history, statistics, alarms and events)
  • PLANET Smart Discovery Utility
  • Reset button for system reboot or reset to factory default
  • PLANET Smart Discovery Utility for deploy management
  • ICMPv6

Specification