,
  1. Home
  2. MGSW-24160F

MGSW-24160F

Product Description

L2+ 16-Port 100/1000BASE-X SFP + 8-Port 10/100/1000BASE-T Managed Metro Ethernet Switch


Physical Port
  • 16 100/1000BASE-X mini-GBIC/SFP slots
  • 8 10/100/1000BASE-T RJ45 copper ports
  • RJ45 to RS232 DB9 console interface for basic management and setup
  • Hardware Conformance
  • 36 to 60V DC, redundant power with polarity reverse protect function
  • 0 to 60 degrees C operating temperature
  • 19-inch rack-mountable
  • Relay alarm for port breakdown, power failure
  • Two built-in thermal fans

Layer 2 Features

  • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • High performance of Store-and-Forward architecture, and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • Storm control support
  • - Broadcast / Unicast / Unknown unicast
  • Supports VLAN
  • - IEEE 802.1Q tagged VLAN
  • - Up to 255 VLANs groups, out of 4095 VLAN IDs
  • - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
  • - Private VLAN Edge (PVE)
  • - Protocol-based VLAN
  • - MAC-based VLAN
  • - IP subnet-based VLAN
  • - Voice VLAN
  • Supports Spanning Tree Protocol
  • - STP, IEEE 802.1D Spanning Tree Protocol
  • - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • - MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
  • - BPDU Guard
  • Supports Link Aggregation
  • - 802.3ad Link Aggregation Control Protocol (LACP)
  • - Cisco ether-channel (static trunk)
  • - Maximum 24 trunk groups, with 8 ports for each trunk
  • - Up to 16Gbps bandwidth (full duplex mode)
  • Provides port mirror (many-to-1)
  • Port mirroring monitors the incoming or outgoing traffic on a particular port
  • Loop protection to avoid broadcast loops
  • Layer 3 IP Routing Features
  • Supports maximum 32 static routes and route summarization

Quality of Service

  • Ingress shaper and egress rate limit per port bandwidth control
  • 8 priority queues on all switch ports
  • Traffic classification
  • - IEEE 802.1p CoS
  • - ToS / DSCP / IP Precedence of IPv4/IPv6 packets
  • - IP TCP/UDP port number
  • - Typical network application
  • Strict priority and Weighted Round Robin (WRR) CoS policies
  • Traffic-policing policies on the switch port
  • DSCP remarking

Multicast

  • Supports IGMP snooping v1, v2 and v3
  • Supports MLD snooping v1 and v2
  • Querier mode support
  • IGMP snooping port filtering
  • MLD snooping port filtering
  • MVR (Multicast VLAN Registration)

Security

  • Authentication
  • - IEEE 802.1x port-based / MAC-based network access authentication
  • - IEEE 802.1x authentication with guest VLAN
  • - Built-in RADIUS client to cooperate with the RADIUS servers
  • - RADIUS / TACACS+ users access authentication
  • Access Control List
  • - IP-based Access Control List (ACL)
  • - MAC-based Access Control List (ACL)
  • Source MAC / IP address binding
  • DHCP Snooping to filter distrusted DHCP messages
  • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • IP Source Guard prevents IP spoofing attacks
  • IP address access management to prevent unauthorized intruder

Management

  • IPv4 and IPv6 dual stack management
  • Switch Management Interfaces
  • - Console / Telnet command line interface
  • - Web switch management
  • - SNMP v1, v2c, and v3 switch management
  • - SSH / SSL secure access
  • IPv6 address / NTP management
  • Built-in Trivial File Transfer Protocol (TFTP) client
  • BOOTP and DHCP for IP address assignment
  • System Maintenance
  • - Firmware upload / download via HTTP / TFTP
  • - Reset button for system reboot or reset to factory default
  • - Dual images
  • DHCP relay and option 82
  • User privilege levels control
  • NTP (Network Time Protocol)
  • Link Layer Discovery Protocol (LLDP) and LLDP-MED
  • Network diagnostic
  • - SFP-DDM (Digital Diagnostic Monitor)
  • - Cable diagnostic technology provides the mechanism to detect and report potential cabling issues
  • - ICMPv6 / ICMPv4 remote ping
  • SMTP / Syslog remote alarm
  • Four RMON groups (history, statistics, alarms and events)
  • SNMP trap for interface link up and link down notification
  • System Log
  • PLANET Smart Discovery Utility for deploy management

Redundant Power System

  • 100~240V AC / 36~60V DC dual power redundancy
  • Active-active redundant power failure protection
  • Backup of catastrophic power failure on one supply
  • Fault tolerance and resilience

Digital Input / Digital Output

  • 2 Digital Input (DI)
  • 2 Digital Output (DO)
  • Integrates sensors into auto alarm system
  • Transfers alarm to IP network via email and SNMP trap

Specification