GS-4210-24P2S
24-Port 10/100/1000T 802.3at PoE + 2-Port 100/1000X SFP Managed Switch
Description
Physical Port
- 24-port 10/100/1000Base-T Gigabit RJ-45 copper
- 2 100/1000Base-X mini-GBIC/SFP slots
- RJ-45 console interface for switch basic management and setup
- Reset button for system factory default and reboot
Power over Ethernet
- Complies with IEEE 802.3at High Power over Ethernet
- Complies with IEEE 802.3af Power over Ethernet
- Up to 24 ports of IEEE 802.3af / 802.3at devices powered
- Supports PoE Power up to 30.8 watts for each PoE port
- 300-watt PoE budget
- Auto detects powered device (PD)
- Circuit protection prevents power interference between ports
- Remote power feeding up to 100m
- PoE Management
- - Total PoE power budget control
- - Per port PoE function enable/disable
- - PoE Port Power feeding priority
- - Per PoE port power limitation
- - PoE delay
- - PD classification detection
Layer 2 Features
- Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
- High performance Store and Forward architecture, runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
- Supports VLAN
- - IEEE 802.1Q tagged VLAN, up to 256 VLAN groups, out of 4094 VLAN IDs
- - Protocol VLAN
- Supports Spanning Tree Protocol
- - STP (Spanning Tree Protocol)
- - RSTP (Rapid Spanning Tree Protocol)
- - MSTP (Multiple Spanning Tree Protocol)
- - STP BPDU Guard, BPDU Filtering and BPDU Forwarding
- Supports Link Aggregation
- - IEEE 802.3ad Link Aggregation Control Protocol (LACP)
- - Maximum 8 LACP groups, up to 16 ports per LACP group
- - Cisco ether-channel (Static Trunk)
- - Maximum 8 trunk groups, up to 8 ports per trunk group
- Provides port mirror (many-to-1)
Quality of Service
- Ingress / Egress Rate Limit per port bandwidth control
- Storm Control support
- - Broadcast / Unknown-Unicast / Unknown-Multicast
- Traffic classification
- - IEEE 802.1p CoS
- - DSCP / IP Precedence of IPv4 / IPv6 packets
- Strict priority and Weighted Round Robin (WRR) CoS policies
- Multicast
- Supports IGMP Snooping v2 and v3
- IGMP Querier mode support
- IGMP Snooping port filtering
- Up to 256 multicast groups
Security
- Authentication
- - IEEE 802.1X port-based network access authentication
- - Built-in RADIUS client to co-operate with the RADIUS servers
- - DHCP Option 82
- - RADIUS / TACACS+ login user access authentication
- Access Control List
- - IPv4 IP-based ACL
- - IPv4 IP-based ACE
- - MAC-based ACL
- - MAC-based ACE
- MAC Security
- - Static MAC
- - MAC Filtering
- Port Security for Source MAC address entries filtering
- DHCP Snooping to filter distrusted DHCP messages
Management
- Switch Management Interface
- - Local Command Line Interface
- - Web switch management
- - Telnet Command Line Interface
- - SNMP v1, v2c and v3
- - HTTPs secure access
- Built-in Trivial File Transfer Protocol (TFTP) client
- Static and DHCP for IP address assignment
- System Maintenance
- - Firmware upload / download via HTTP / TFTP
- - Configuration upload / download through HTTP / TFTP
- - Dual Images
- - Hardware reset button for system reboot or reset to factory default
- SNTP Network Time Protocol
- Link Layer Discovery Protocol (LLDP) Protocol and LLDP-MED
- SNMP trap for interface Link Up and Link Down notification
- Event message logging to remote Syslog server
- Four RMON groups (history, statistics, alarms and events)
- PLANET Smart Discovery Utility
- Reset button for system reboot or reset to factory default
- PLANET Smart Discovery Utility for deploy management
- ICMPv6
Specification
