IGSW-24040T

  • IGSW-24040T - ADVICE.CO.IL
Industrial 24-Port 10/100/1000Mbps with 4-Port Shared SFP Managed Gigabit Switch

Physical Port
  • 　 24-Port 10/100/1000Base-T Gigabit Ethernet RJ-45
  • 　 4 100/1000Base-SX/LX SFP slots, shared with Port-21 to Port-24
  • 　 RS-232 DB9 console interface for Switch basic management and setup
Layer 2 Features
  • 　 Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
  • 　 High performance of Store-and-Forward architecture, broadcast storm control and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
  • 　 Storm Control support
  • 　　- Broadcast / Multicast / Unknown-Unicast
  • 　 Supports VLAN
  • 　　- IEEE 802.1Q Tagged VLAN
  • 　　- Up to 255 VLAN groups, out of 4094 VLAN IDs
  • 　　- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
  • 　　- Private VLAN Edge (PVE)
  • 　　- Voice VLAN
  • 　 Supports Spanning Tree Protocol
  • 　　- STP, IEEE 802.1D Spanning Tree Protocol
  • 　　- RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
  • 　　- MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
  • 　　- BPDU Guard
  • 　 Supports Link Aggregation
  • 　　- 802.3ad Link Aggregation Control Protocol (LACP)
  • 　　- Cisco ether-channel (Static Trunk)
  • 　　- Maximum 12 trunk groups, up to 16 ports per trunk group
  • 　　- Up to 16Gbps bandwidth (duplex mode)
  • 　 Provides Port Mirror (many-to-1)
  • 　 Port Mirroring to monitor the incoming or outgoing traffic on a particular port
Quality of Service
  • 　 Ingress Shaper and Egress Rate Limit per port bandwidth control
  • 　 4 priority queues on all switch ports
  • 　 Traffic classification
  • 　　- IEEE 802.1p CoS
  • 　　- TOS / DSCP / IP Precedence of IPv4/IPv6 packets
  • 　　- IP TCP/UDP port number
  • 　　- Typical network application
  • 　 Strict priority and Weighted Round Robin (WRR) CoS policies
  • 　 Supports QoS and In/Out bandwidth control on each port
  • 　 Traffic-policing policies on the switch port
  • 　 QoS Control List Wizard makes QoS creation and configuration easier and more quickly
  • 　 DSCP remarking
Multicast
  • 　 Supports IGMP Snooping v1, v2 and v3
  • 　 IGMP Snooping port filtering
  • 　 Querier mode support
  • 　 Multicast VLAN Registration (MVR) support
Security
  • 　 IEEE 802.1x Port-based / MAC-based network access authentication
  • 　 Built-in RADIUS client to co-operate with the RADIUS servers
  • 　 TACACS+ login users access authentication
  • 　 RADIUS / TACACS+ users access authentication
  • 　 IP-based Access Control List (ACL)
  • 　 MAC-Based Access Control List
  • 　 Source MAC / IP address binding
  • 　 DHCP Snooping to filter un-trusted DHCP messages
  • 　 Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
  • 　 IP Source Guard prevents IP spoofing attacks
  • 　 Auto DoS rule to defend DoS attack
  • 　 IP address access management to prevent unauthorized intruder
Management
  • 　 Switch Management Interfaces
  • 　　- Console / Telnet Command Line Interface
  • 　　- Web switch management
  • 　　- SNMP v1, v2c, and v3 switch management
  • 　　- SSH / SSL secure access
  • 　 Four RMON groups (history, statistics, alarms, and events)
  • 　 IPv6 IP Address / NTP / DNS management
  • 　 Built-in Trivial File Transfer Protocol (TFTP) client
  • 　 BOOTP and DHCP for IP address assignment
  • 　 Firmware upload / download via HTTP / TFTP
  • 　 DHCP Relay and Option 82
  • 　 User Privilege levels control
  • 　 NTP (Network Time Protocol)
  • 　 Link Layer Discovery Protocol (LLDP) Protocol
  • 　 Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
  • 　 Reset button for system reboot or reset to factory default
  • 　 PLANET Smart Discovery Utility for deploy management
  • 　 ICMPv6
  • 　 Digital Input / Digital Output
  • 　 Fault Alarm
  • 　 SMTP / Syslog / SNMP Trap remote alarm
  • 　 System Log
Redundant Power System
  • 　 100~240V AC / 36~ 72V DC Dual power redundant
  • 　 Active-active redundant power failure protection
  • 　 Backup of catastrophic power failure on one supply
  • 　 Fault tolerance and resilience
  • Digital Input / Digital Output
  • 　 2 Digital Input (DI)
  • 　 2 Digital Output (DO)
  • 　 Integrates sensors into auto alarm system
  • 　 Transfers alarm to IP network via email and SNNP trap


Specification