WGSW-48040HP

  • WGSW-48040HP - ADVICE.CO.IL
  • L2+ 48-Port 10/100/1000T 802.3at PoE + 4-Port Shared 100/1000X SFP Managed Switch

  • Physical Port
  • 48-port 10/100/1000Base-T RJ-45 copper with IEEE 802.3at / 802.3af Power over Ethernet Injector function
  • 4 SFP shared combo interfaces, SFP(Mini-GBIC) supports 100/1000X dual mode, shared with Port-45 to Port-48
  • RJ-45 to RS-232 console interface for basic management and setup
  • Power over Ethernet
    • Complies with IEEE 802.3at High Power over Ethernet End-Span PSE
    • Complies with IEEE 802.3af Power over Ethernet End-Span PSE
    • Up to 48 ports of IEEE 802.3af / 802.3at devices powered
    • Supports PoE power up to 30.8 watts for each PoE port
    • Auto detects powered device (PD)
    • Circuit protection prevents power interference between ports
    • Remote power feeding up to 100 meters

    • PoE Management

    • - Total PoE power budget control
    • - Per port PoE function enable/disable
    • - PoE Port Power feeding priority
    • - Per PoE port power limit
    • - PD classification detection
    • - PD alive-check
    • - PoE schedule
    • - PD power recycling schedule

    • Layer 2 Features

    • Prevents packet loss with back pressure (half-duplex) and IEEE 802.3x pause frame flow control (full-duplex)
    • High performance of Store-and-Forward architecture and runt/CRC filtering eliminates erroneous packets to optimize the network bandwidth
    • Storm Control support
    • - Broadcast / Multicast / Unknown-Unicast
    • Supports VLAN
    • - IEEE 802.1Q Tagged VLAN
    • - Up to 255 VLANs groups, out of 4094 VLAN IDs
    • - Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
    • - Private VLAN Edge (PVE)
    • - Protocol-based VLAN
    • - MAC-based VLAN
    • - Voice VLAN
    • - IP Subnet VLAN
    • Supports Spanning Tree Protocol
    • - STP, IEEE 802.1D Spanning Tree Protocol
    • - RSTP, IEEE 802.1w Rapid Spanning Tree Protocol
    • - MSTP, IEEE 802.1s Multiple Spanning Tree Protocol, spanning tree by VLAN
    • - BPDU Guard
    • Supports Link Aggregation
    • - 802.3ad Link Aggregation Control Protocol (LACP)
    • - Cisco ether-channel (Static Trunk)
    • - Maximum 24 trunk groups, up to 8 ports per trunk group
    • - Up to 16Gbps bandwidth (full duplex mode)
    • Provides Port Mirror (many-to-1)
    • Port Mirroring to monitor the incoming or outgoing traffic on a particular port
    • Loop protection to avoid broadcast loops
    • Layer 3 IP Routing Features
    • Supports maximum 128 static routes and route summarization

    • Quality of Service

    • Ingress Shaper and Egress Rate Limit per port bandwidth control
    • 8 priority queues on all switch ports
    • Traffic classification
    • - IEEE 802.1p CoS
    • - TOS / DSCP / IP Precedence of IPv4/IPv6 packets
    • - IP TCP/UDP port number
    • - Typical network application
    • Strict priority and Weighted Round Robin (WRR) CoS policies
    • Traffic-policing policies on the switch port
    • DSCP remarking

    • Multicast

    • Supports IGMP Snooping v1, v2 and v3
    • Supports MLD Snooping v1 and v2
    • Querier mode support
    • IGMP Snooping port filtering
    • MLD Snooping port filtering
    • Multicast VLAN Registration (MVR)

    • Security

    • IEEE 802.1x Port-based / MAC-based network access authentication
    • Built-in RADIUS client to co-operate with the RADIUS servers
    • TACACS+ login users access authentication
    • RADIUS / TACACS+ users access authentication
    • IP-based Access Control List (ACL)
    • MAC-based Access Control List
    • Source MAC / IP address binding
    • DHCP Snooping to filter untrusted DHCP messages
    • Dynamic ARP Inspection discards ARP packets with invalid MAC address to IP address binding
    • IP Source Guard prevents IP spoofing attacks
    • Auto DoS rule to defend DoS attack
    • IP address access management to prevent unauthorized intruder

    • Management

    • Switch Management Interfaces
    • - Console / Telnet Command Line Interface
    • - Web switch management
    • - SNMP v1, v2c, and v3 switch management
    • - SSH / SSL secure access
    • Four RMON groups (history, statistics, alarms, and events)
    • IPv6 IP Address / NTP / DNS management
    • Built-in Trivial File Transfer Protocol (TFTP) client
    • BOOTP and DHCP for IP address assignment
    • Firmware upload / download via HTTP / TFTP
    • DHCP Relay
    • DHCP Option82
    • User Privilege levels control
    • NTP (Network Time Protocol)
    • Link Layer Discovery Protocol (LLDP)
    • SFP-DDM (Digital Diagnostic Monitor)
    • Cable Diagnostic technology provides the mechanism to detect and report potential cabling issues
    • Reset button for system reboot or reset to factory default
    • PLANET Smart Discovery Utility for deploy management
    • ICMPv6
    Specification