Power Over Ethernet - POE

Power over Ethernet - POE

Power Over Ethernet - power transfer over the network cables

The POE technology is an innovative technology that enables the supply of electrical voltage over the existing network cables at a distance of up to 100 meters from the power source, and enables the supply of electricity in places where the installation of regular power points is problematic or dangerous.

The POE products allow the feeding of various network equipment without any need to connect the product directly to electricity, thereby creating significant savings in double wiring and creating new power points.

Budvis Communications offers a wide range of solutions in the field of POE
All communication products comply with the POE 802.3af/at standard and are therefore also adapted to work with POE products of various companies and manufacturers.

The POE (Power Over Ethernet) products are divided into 2 working configurations: MidSpan and EndSpan

EndSpan - this method is adapted to work in the installation of new communication networks. In this case, the power goes directly from the communication switch (switch) in POE technology over the network cables to the end equipment.

MidSpan - This method is used when there is a local LAN network and you want to turn it into a POE technology network, in this case you add a device to the network (a POE injector or a POE hub, the device bridges the switch and the end devices.
The added device supplies the electrical voltage to the end devices.

At Advis Communications you can find a wide variety of POE solutions:

POE - MidSpan integrated communication switches
The above switches are partially or fully integrated POE, at speeds up to M10/100/1000 with different power outputs from Watt7.5 to Watt 30.8.

The above-mentioned switches are specially adapted to feed wireless end units (Access points), IP cameras (network cameras), IP telephony, VOIP telephony and various types of products adapted to POE input.

Injectors - PoE

(Injectors) POE injectors (POE Hubs) POE hubs – EndSpan

(Injectors) POE injectors

is a feeding unit adapted to feed a single product, the POE injector comes with a connection to electricity on one side, a 45RJ input to connect to the communication switch and a 45RJ output to connect to the product that you wish to feed with electricity.

(POE Hubs) POE hubs

It is essentially a concentration of POE injectors in one product with one electrical connection and a variable number of network inputs according to the customer's requirement.

Badvis Communications has a professional sales department specializing in POE and communication networks and a courteous and professional service and technical support department that will be happy to advise and tailor a suitable solution for you!

For more details and advice call 03-9000990

{formbuilder:5447}